Contact US
Get Your Custom Water Solution !
SHANGHAI IDEER INDUSTRY CO.,LTD
Shanghai Ideer, idea for healthy drinking water! Engaged in the water purifier industry for more than 10 years.
Bubbles or foam in the water produced by a reverse osmosis (RO) system can be caused by a few different factors. It’s essential to understand the potential reasons behind this occurrence and whether it poses any harm to your health.
Possible reasons for bubbles in water from an RO system:
Air in the System: If air gets trapped in the RO system, it can be carried along with the purified water and manifest as bubbles when the water is dispensed.
High Pressure: In some cases, excessive pressure in the RO system can cause air to dissolve into the water, leading to the formation of bubbles.
Temperature Changes: Temperature variations can affect the solubility of gases in water. If there’s a significant change in temperature, dissolved gases like air might come out of the solution and form bubbles.
Carbonation from Faucet: Sometimes, bubbles might appear if the faucet used to dispense the RO water is designed for carbonated water or has a feature that introduces air into the water stream.
Is it harmful to the body?
Generally, bubbles in water from an RO system are not harmful to your health. The bubbles are most likely air or dissolved gases that do not pose any significant risk. However, it’s essential to ensure that the RO system is properly maintained and functioning correctly to avoid any potential contamination issues.
To address the presence of bubbles in your RO water, consider the following steps:
Check for leaks or improper connections in the RO system that may be introducing air.
Examine the water pressure in the RO system to ensure it is within the recommended range.
If you suspect that the faucet might be contributing to the bubbles, try using a different faucet or a different type of dispenser.
If the issue persists or you have concerns about the water quality, it’s a good idea to have your RO system checked by a professional or contact the manufacturer for assistance.
In conclusion, bubbles in water from an RO system are typically harmless, but it’s essential to investigate the root cause to ensure the system is working optimally and providing high-quality purified water.